logo image
Menu openMenu Close
SearchSearchSearchSearch
What are you looking for?

SCHURTER Electronic components Catalog


KE  IEC connector C14 with fuse holder 1- or 2-pole Screw-on version from front or rear side with voltage selector
IEC connector C14 with fuse holder 1- or 2-pole
Screw-on version from front or rear side
with voltage selector
KE  IEC connector C14 with fuse holder 1- or 2-pole Snap-in version from front side
IEC connector C14 with fuse holder 1- or 2-pole
Snap-in version
from front side
KE  IEC connector C14 with fuse holder 1- or 2-pole Screw-on version from front or rear side with voltage selector
KE  IEC connector C14 with fuse holder 1- or 2-pole Snap-in version from front side

Series: KE

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector

Free Sample Request

15 Variants


Connectors (Inlets/Outlets)

C14
Connector Logo
70° C

Description

  • Panel mount: Screw-on version from front or rear side, snap-in version front side
  • 3 Functions: Appliance Inlet Protection class I, Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm 1  or 2 pole, Voltage Selector (series-parallel) Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
  • Quick connect terminals 4.8 x 0.8 mm

Characteristics

  • Available with or without internal partial wired connections
  • For added safety "Extra-Safe" fuse drawers are available
  • Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

  • For protection class II

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Ratings IEC

Ratings IEC


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 60 Hz

Dielectric Strength

Dielectric Strength


Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals


Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Quick connect terminals 4.8 x 0.8 mm

Panel Thickness S

Panel Thickness S


See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Appliance inlet/-outlet


Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Fuseholder

Fuseholder



1.) fuse holder does not include circuit breakers
2.) Details about fuse-links can be found in the catalog under
FusesDetailed information on the fuse holder and fuse drawers can be found in the general product information.
Fuse drawer

1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6,
for fuse-links 5 x 20 / 6.3 x 32 mm

Rated Power Acceptance @ Ta 23 °C

5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole
6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole

Power Acceptance @ Ta > 23°C

Admissible power acceptance at higher ambient temperature see derating curves

Voltage Selector

Voltage Selector


You can refer to different input voltages
Details about the voltage selector can also be found in the general product information
Voltage Selector

series-parallel, 4, 3 or 2 switch positions or usable as 2-pole change-over switch

020050160000001109

Short Table of Variants KE Open complete table KE

Panel mounting Panel Thickness s [mm] Fuseholder Order Number
Free Sample

Free Sample


Please ask for free sample in order to check if the products meets your requirement for your application.
Send your delivery adress and your specific requirements.

Distributor Stock Check

Distributor Stock Check


The following links refers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.
The stock availability at the distributors may also be called up separately and the desired product manually entered.
Stock Check Distributor

...
             



 
Snap-in 1.5 1-pole KE15.1100.105 ...
Snap-in 1.5 1-pole KE16.5100.105 ...
Snap-in 2 1-pole KE16.5100.107 ...
Snap-in 2.5 1-pole KE16.5100.109 ...
Snap-in 1.5 2-pole KE10.2100.105 ...
Snap-in 2 2-pole KE10.2100.107 ...
Snap-in 2.5 2-pole KE10.2100.109 ...
Snap-in 1.5 2-pole KE10.6100.105 ...
Snap-in 2 2-pole KE10.6100.107 ...
Snap-in 2.5 2-pole KE10.6100.109 ...
Screw - 1-/2-pole KE20.2100.151 ...
Screw - 1-pole KE15.1100.151 ...
Screw - 1-pole KE16.5100.151 ...
Screw - 2-pole KE10.2100.151 ...
Screw - 2-pole KE10.6100.151 ...

The fuse drawer is not included and must be ordered separately (see required accessory).

Packaging unit 20 Pcs 

020050160000001109

25.09.2024
en prod By changing the catalog version (Desktop <> Mobile), the system is resetting the chosen filters
ScrollToTop
ShareShare
ShareShare on Linkedin
Copy link
Send via e-mail
CloseYou will be transferred to the selected country page address. Therefore you will leave the SCHURTER main page.
If you would you like to visit your selected country page, please click on the button below:
If you would like to stay on the SCHURTER global website, please click on the button below:www.schurter.com
Note: Your country preferences for the SCHURTER Global Website are now saved.