Series: 4798

IEC Appliance Inlet C20, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal, IP4 0 or IP 54

3 Variants

Connectors (Inlets/Outlets)

C20

70° C

Approvals and Compliances

CAD

Description

Screw-on mounting front side
Appliance Inlet, Pin temperature 70 °C, Protection class I
V-Lock notch standard
Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.
Variant with IP54 from front side into the appliance
Solder / Quick Connect

Detailed request for product

Details 4798

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

16 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

20 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 2.2 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 / IP54 acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Solder / Quick Connect

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.3 Nm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C20 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 4798

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40020659
UL Approvals	UL	UR File Number: E96454
CCC Approvals	CCC	CCC Certificate Number: 2019180204009311, 2020180204012877

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60335-1	Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
White Paper Glow wire test	SCHURTER AG	Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.

Dimensions [mm]

	4798

	A = 32.0 mm: quick-connect terminals 6.3 x 0.8 mm A = 30.4 mm: quick-connect terminals 4.8 x 0.8 mm A = 29.0 mm: solder terminals

Assembly Instructions

	4798 incl. sealing kit for IP54

	1) Sealing screw 2) Inlet gasket factory mounted in inlet 3) Appliance inlet 4) Flat gasket

	Dimensions flat gasket and sealing screw

Short Table of Variants 4798 Open complete table 4798

Panel mounting	Panel Thickness s [mm]	Terminal	Order Number	...

Screw	-	Quick connect terminals 6.3 x 0.8 mm	3-100-550	...
Screw	-	Quick connect terminals 6.3 x 0.8 mm	4798.9000	...
Screw	-	Solder terminals	4798.9200	...

Packaging unit

100 Pcs

Table of Variants 4798

Panel mounting	Panel Thickness s [mm]	Terminal	IP Protection Class Front Side	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

Screw	-	Quick connect terminals 6.3 x 0.8 mm	IP54	3-100-550	100
Screw	-	Quick connect terminals 6.3 x 0.8 mm	IP40	4798.9000	100
Screw	-	Solder terminals	IP40	4798.9200	100

Packaging unit

100 Pcs

References / Document Downloads

References 4798

Alternative: version with line filter (2)

[Swipe to the left and right for more options]

5130

C20F

Mating Components 4798

Mating Outlets/Connectors (3)

[Swipe to the left and right for more options]

4795

4795, Mounting: Power Cord, Cable Connector: IEC C19

4790

4790, Mounting: Power Cord, Screw Connector: IEC C19

0104U

0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19

Mating Outlets/Connectors shuttered (1)

[Swipe to the left and right for more options]

VAC19KS

VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black

Accessories 4798

Accessories (3)

[Swipe to the left and right for more options]

Wire Harness

Wire harness for SCHURTER products

RC320

Rear Cover for Power Entry Module

Cord retaining kits

Cord retaining strain relief

26.09.2024

Transformation_Date:	2024-09-26 17:16:39
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG07_Export/2024_09_26/09_34_53_912_552419/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Connectors (Inlets/Outlets)
Typ_Name:	4798
Typ_AliasNames:	:4798:
Typ_ID:	411
Typ_Hierarchie:	020070030000002298
Typ_EPIM_Order:	430
Typ_Titel:	IEC Appliance Inlet C20, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal, IP4 0 or IP 54
PublPrgr_Name:	Connector (Inlet/Outlet)
PublPrgr_Shortcut:	PG07
Variant table:	Variantentabelle V48 (22109)

Series: 4798

Description 4798

Description

Details 4798

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Assembly Instructions

Short Table of Variants 4798 Open complete table 4798

References / Document Downloads

References 4798

Alternative: version with line filter (2)

Mating Components 4798

Mating Outlets/Connectors (3)

Mating Outlets/Connectors shuttered (1)

Accessories 4798

Accessories (3)